Fujitsu Ricoh Fujitsu ScanSnap iX1400 Document Scanner - Manual (Page 45)

Setting Up S1100i
Set up the ScanSnap so that it is ready to scan with ScanSnap Manager.
The following preparations are required before you set up the ScanSnap.
l Check that all items are included in the package
For details, refer to
"Package List for S1100i" (page 48) .
HINT
When Getting Started is included in the package, refer to "Package List" in Getting Started.
l Remove the tape seal (1) and tape (2) from the ScanSnap
1 2
The procedure to set up the ScanSnap is as follows:
1. Downloading the Software
2. Installing the Software/Connecting the ScanSnap
3. Checking the Scanning Operation
1
Downloading the Software
1. Turn on the computer and log on as a user with Administrator privileges.
2. Access the download web pages of the software programs.
http://scansnap.fujitsu.com/global/dl/
3. Select your model and operating system and click [Display software list] to display the list of
software programs to be installed.
4. Download [ScanSnap Installer] from the software list that is displayed in [Those using ScanSnap
Manager] in [Setup Programs] and save it on your computer.
By using the installer that you downloaded, you can install the following software programs.
l ScanSnap Manager
l ScanSnap Online Update
l ScanSnap manual
Install software applications other than the above if needed.
For the overview for each software program, refer to
"Overview of the Software Related to the
ScanSnap" (page 84) .
Setting Up S1100i
45