Incorrect – Fujitsu Ricoh Fujitsu ScanSnap iX1400 Document Scanner User Manual

Page 301

Advertising
background image

ATTENTION

l

Load all documents over one another above the pick roller (center). Documents that are not
loaded above the pick roller cannot be fed.

Incorrect

Pick Roller Assembly's Width

l

Adjust the side guides to the widest document. If the side guides are not adjusted properly, a
paper jam may occur.

l

Load smaller documents so that they can be scanned straight.
If the documents are skewed during scanning, the following problems may occur:
-

Part of the document does not appear in the scanned image

-

Slant lines appear in the scanned image

-

The documents are scanned in a wrong paper size

If the documents are not scanned straight, it is recommended that you select the [Continue
scanning after last page] checkbox in the [Scanning] tab of the

"ScanSnap Setup Window"

(page 88)

, separate the documents by their widths, and scan them in different batches.

8.

Press the [Scan] button on the ScanSnap to start a scan.

ATTENTION

Do not perform the following operations during scanning. Doing so will stop scanning.

l

Connect or disconnect the ScanSnap and other USB devices.

l

Close the ADF paper chute (cover).

Scanning Documents with S1300i

301

Advertising