Vaddio DocCAM 20 HDBT OneLINK Bridge System User Manual
Onelink bridge, Complete manual for the
Advertising
Table of contents
Document Outline
- Overview
- A Quick Look at the OneLINK Device
- Installing the OneLINK Device
- Don’t Void Your Warranty!
- Cabling Notes
- RS-232 Connector Pin-Outs
- Mounting the OneLINK Device
- About Installations Using the Half-Recessed Ceiling Mount
- Connections for HDBaseT Cameras
- Connections for HDMI Cameras
- Connections for HDBaseT Cameras Used with Codecs
- Connections for HDMI Cameras Used with Codecs
- Powering Up the Equipment
- Web Interface
- Initial Device Set-Up and System Administration Tasks
- System Administration
- Configuring Access and Other Security Settings
- Configuring a Static IP Address for a Device Currently at 169.254.10.1
- Changing from an Automatically Assigned Address to a Static IP Address
- Changing the Device's Hostname
- Specifying Time Zone and NTP Server
- Adding Room Information to the Web Interface
- Serial Control Settings
- Accessing the Connected Camera's Web Interface
- Performance and Behavior Settings
- Configuring USB Streaming Settings
- Configuring Audio Settings
- Enabling Phantom Power to Microphones
- Reading the Audio Matrix
- Routing Audio
- Default Microphone Settings
- Microphone Settings for Environments with Audiences
- Microphone Adjustments
- Speaker Adjustments
- About Echo Cancellation
- Preventing Audio Feedback
- Setting SDI Level for SDI Video Output
- System Maintenance
- Telnet Serial Command API
- Troubleshooting
- Index