Vaddio DocCAM 20 HDBT OneLINK Bridge System - Manual (Page 5)

Overview
This guide covers the OneLINK™ Bridge AV interface, which is available in several kit configurations for
use with Vaddio or third-party cameras, with or without third-party codecs. It is also available as a
component of several Vaddio camera systems.
If the OneLINK device is sold for use with an HDMI camera, it is shipped with a OneLINK EZCamera
Interface Module (EZIM).
Note
OneLINK devices are not compatible with PoE+ powered HDMI cameras such as RoboSHOT ® 12E
HDMI and RoboSHOT 30E HDMI. OneLINK devices are compatible with the discontinued RoboSHOT
12 HDMI and RoboSHOT 30 HDMI cameras.
What's in this Guide
This guide provides information about:
n Physical features
n Installation
n System administration and configuration
n Serial API for third-party control
n Troubleshooting and maintenance
For your convenience, the information you need to install this product is also available in the smaller,
stand-alone
Installation Guide for the OneLINK Bridge AV Interface , which covers physical features,
installation, and initial power-on.
1