HP Data Explorer 4 Series - Manual (Page 115)

Peak Detection
Data Explorer ™ Software User’s Guide 3-17
3
Setting Advanced
Settings
(spectrum data
only)
To set Advanced Settings that you can apply locally to a
selected detection range, and that override the thresholds set
in the Basic Settings tab:
1. In the Basic Settings tab, select Use Advanced
Settings.
2. Click the Advanced Settings tab in the Spectrum Peak
Detection Setup dialog box.
NOTE: If you select Use Resolution Dependent
Settings in the Basic Settings tab, Basic Settings
override Advanced Settings. The Advanced Settings
tab is accessible, but all parameters are dimmed. To
make Advanced Settings available for editing, select
Use Advanced Settings on the Basic Settings tab.
The Advanced Settings tab is displayed (Figure 3-6).
Figure 3-6 Spectrum Peak Detection Setup—
Advanced Settings Tab