HP Data Explorer 4 Series - Manual (Page 278)

Chapter 6 Using Tools and Applications
6-8 Applied Biosystems
6
2. To change the limits for an element, double-click an
element to display the Isotope dialog box (Figure 6-4).
Figure 6-4 Isotope Dialog Box
NOTE: Ignore the column of check boxes to the left of
the Isotope column if it is displayed.
3. Change the Minimum and Maximum number of
occurrences for the element as needed.
NOTE: The software ignores changes you make to the
individual isotope minimum and maximum values.
4. Click OK.
5. Change limits for other elements as needed, then click
OK to return to the Elemental Composition Calculator.