HP Data Explorer 4 Series - Manual (Page 308)

Chapter 6 Using Tools and Applications
6-38 Applied Biosystems
6
6.7.3 Assigning Macros to Buttons
Only macros present in the DATAEXPLORER.VB6 file can be
assigned to buttons and run in the Data Explorer software.
NOTE: If you have installed a new version of Data Explorer
software, new macros may be provided. New macros are
not available for use until you import them into the Data
Explorer project. For information, see Section 6.7.7,
Importing or Exporting Macros in DATAEXPLORER.VB6.
Assigning a
macro to a button
You can assign macros to 10 buttons. To assign a macro:
1. From the Tools menu, select Assign Macro.
The Assign Macro dialog box (Figure 6-24) is
displayed.
Figure 6-24 Assign Macro Dialog Box
2. Select the button to assign from the list on the left, and the
macro to assign from the list on the right.
3. Click Assign.
The macro button in the toolbar to which you assigned
the macro turns from gray to green (if it did not
previously have a macro assigned to it).