HP Data Explorer 4 Series - Manual (Page 335)

Voyager Data Examples
Data Explorer ™ Software User’s Guide 7-19
7
Procedure To detect peaks from complex mixtures:
1. Display the spectrum of interest.
Noise
filtering/smoothing
2. From the Process menu, select Noise Filter/Smooth.
The Noise Filter/Smooth dialog box (Figure 7-19) is
displayed.
Figure 7-19 Noise Filter/Smooth Dialog Box
3. Select Default Smoothing or Noise Filter (with a
Correlation Factor of 0.7), then click OK.
For more information, see Section 5.7, Noise
Filtering/Smoothing.
Setting detection
thresholds
4. Click in the toolbar or select Peak Detection from
the Peaks menu.
The Spectrum Peak Detection Setup dialog box is
displayed with the Basic Settings tab (Figure 7-20)
displayed.