HP Data Explorer 4 Series - Manual (Page 315)

Using the Macro Recorder
Data Explorer ™ Software User’s Guide 6-45
6
6.7.8 Running Macros Automatically
When Opening and Closing Files
You can set the Data Explorer software to automatically run
macros you previously created when you open or close a data
file. For information on creating macros, see Section 6.7.2,
Recording a Macro.
To set up automatic macros:
1. From the Tools menu, select Automatic Macros.
The Automatic Macro Setup dialog box (Figure 6-26) is
displayed.
Figure 6-27 Automatic Macro Setup Dialog Box
2. Select File Open Macro or File Close Macro, as desired,
then select the macro to run when you open or close a
data file.
3. Click OK.