HP Data Explorer 4 Series - Manual (Page 305)

Using the Macro Recorder
Data Explorer ™ Software User’s Guide 6-35
6
Location of
macros
All macros you record are stored in a file called
DATAEXPLORER.VB6 in the C:\MARINER\PROGRAM or
C:\VOYAGER directory.
Displaying the
macro toolbar
If the macro toolbar (Figure 6-22) is not displayed:
1. Select Toolbar from the View menu.
2. Select Macros, then click Close.
Figure 6-22 Macro Toolbar
If a numbered macro button is disabled (gray), no macro has
been assigned to it. If a numbered macro button is enabled
(green), a macro has been assigned to it.
For a description of a toolbar button, place the cursor on the
toolbar button. The name you assign to the macro or the
default macro name is displayed below the button.
Functions not
supported
Most commands in the Data Explorer software can be
included in a macro that you create with the Macro Recorder.
The following menu commands are not supported by the
Macro Recorder:
Menu Commands Not Supported
File • Open
• Close
• Close All
• Result Spectrum—Delete
• Convert All Spectra—New Data Format
• Export—Result Spectrum
• Settings—Save Processing Settings
• Settings—Restore Graphic Settings
• Settings—Save Graphic Settings
• Settings—Revert to last saved Graphic/Processing Settings
• Print Setup
• Exit
Continued