HP Data Explorer 4 Series - Manual (Page 399)

Preparing Data Before Accessing Macros
Data Explorer ™ Software User’s Guide C-3
C
References
required
The following references are selected by default in the
DataExplorerProject in the Visual Basic Editor and are
required for the macros in the DataExplorer.VB6 file to
successfully run:
• Visual Basic For Applications
• Data Explorer 4.0 Type Library
• OLE Automation
• Microsoft Forms 2.0 Object Library
• Microsoft Internet Controls
To view references:
1. Open the DataExplorerProject (select
VisualBasicEditor from the Tools menu in the Data
Explorer window).
2. Select References from the Tools menu in the Visual
Basic Editor.
C.2 Preparing Data
Before Accessing Macros
Before you access the toolbox, open data files of interest and:
• Smooth the data, if necessary, to reduce noise
• Set optimum peak detection and labeling
• Set the display range or zoom as needed
• Resize and organize the displays as needed
• Enable Allow Overlapping Labels (select Peak Label
from the Peaks menu). If overlapping labels are not
enabled, some peaks may not be labeled.
NOTE: Before using the MS Fit/MS Tag toolbox, additional
data preparation is recommended. See Section Using MS
Fit/MS Tag Toolbox.