HP Data Explorer 4 Series - Manual (Page 291)

Using the Mass Resolution Calculator
Data Explorer ™ Software User’s Guide 6-21
6
Figure 6-12 Mass Resolution Calculator
5. Specify the peak for which to calculate resolution by doing
one of the following:
• Type in a Mass/Charge value.
• In the Spectrum window, right-click-drag over
the peak for which you want to calculate
resolution. The mass is automatically entered
in the Resolution Calculator dialog box.
NOTE: If you right-click-drag over more than one
peak, the mass of the highest peak is used.
6. Click OK.
FWHM=50% peak height