HP Data Explorer 4 Series - Manual (Page 67)

Adjusting the Display Range
Data Explorer ™ Software User’s Guide 2-11
2
2.2 Adjusting the Display Range
To set the display range:
1. Click the Chromatogram or Spectrum window to
activate it.
2. From the Display menu, select Range.
3. Select X Range to set the x-axis range. The scaling units
depend on the window you are scaling:
• Chromatogram—Scales in the same units
currently displayed in the Chromatogram
window (Spectrum Number or Time [Mariner
data only])
• Spectrum—Scales in m/z units
4. Select Y Range to scale the y-axis range.
The Y Axis Setup dialog box (Figure 2-6) is displayed.
Figure 2-6 Y Axis Setup Dialog Box