HP Data Explorer 4 Series - Manual (Page 307)

Using the Macro Recorder
Data Explorer ™ Software User’s Guide 6-37
6
6.7.2 Recording a Macro
To record a macro:
1. Open a data file.
2. From the Tools menu, select Record New Macro.
The Record Macro dialog box (Figure 6-23) is
displayed.
Figure 6-23 Record Macro Dialog Box
3. Type a name and a description if desired.
4. Click OK.
5. Select the commands you want to automate with the
macro. For example, select Noise Filter/Smooth from the
Process menu, select the smoothing method, specify the
associated parameter, then click OK.
Not all functions in Data Explorer are supported. See
“Functions not supported” on page 6-35.
6. From the Tools menu, select Stop Macro Recording.
The macro is saved and added to the
DATAEXPLORER.VB6 file.