LG C Series - Manual (Page 3)

CAUTION
„ Do not install the drive on a flammable surface. Do not place flammable
material nearby the drive.
Otherwise, fire could occur.
„ Remove the input power from the drive if a hardware failure occurs.
Otherwise, it could result in a secondary accident and fire.
„ The drive surface can emit high temperature. Be cautioned when touching.
Otherwise, you may get a skin-burn.
„ Do not apply power to a damaged inverter or to an inverter with parts
missing even if the installation is complete.
Otherwise, electric shock could occur.
„ Do not allow paper, wood chips, dust, metallic chips or other foreign matter
into the inverter.
Otherwise, fire or accident could occur.
OPERATING PRECAUTIONS
(1) Handling and installation
Handle according to the weight of the product.
Do not stack the inverter boxes higher than the number recommended.
Install according to instructions specified in this manual.
Do not open the cover during delivery.
Do not place heavy items on the inverter.
Check the inverter mounting orientation.
Do not drop the inverter, or subject it to impact.
Use the Type 3 grounding method for 200 V Class (Ground impedance: Below 100 ohm).
Take protective measures against ESD (Electrostatic Discharge) before touching the PCB for
inspection or installation.
Use the inverter under the following environmental conditions:
Surrounding
temperature -10 ~ 50 (14 ~ 122 ), non-freezing
Relative
humidity 90% RH or less (non-condensing)
Storage
temperature - 20 ~ 65 (-4 ~ 149 )
Location
Protected from corrosive gas, combustible gas, oil mist or
dust
Environment
Altitude,
Vibration Max. 1,000m (3000 ft) above sea level, Max. 5.9m/sec
2
(0.6G) or less
3