Parker Hannifin 88-021610-01G - Manual (Page 11)

Parker Hannifin
11
Important User Information
It is important that motion control equipment is installed and operated in such a way that all
applicable safety requirements are met. It is your responsibility as an installer to ensure that you
identify the relevant safety standards and comply with them; failure to do so may result in
damage to equipment and personal injury. In particular, you should study the contents of this
user guide carefully before installing or operating the equipment.
The installation, set up, test, and maintenance procedures given in this User Guide should only
be carried out by competent personnel trained in the installation of electronic equipment. Such
personnel should be aware of the potential electrical and mechanical hazards associated with
mains-powered motion control equipment—please see the safety warnings below. The individual
or group having overall responsibility for this equipment must ensure that operators are
adequately trained.
Under no circumstances will the suppliers of the equipment be liable for any incidental,
consequential or special damages of any kind whatsoever, including but not limited to lost profits
arising from or in any way connected with the use of the equipment or this guide.
Warning — High-performance motion control equipment is capable of producing rapid
movement and very high forces. Unexpected motion may occur especially during the
development of controller programs. KEEP WELL CLEAR of any machinery driven by stepper or
servo motors. Never touch any part of the equipment while it is in operation.
This product is sold as a motion control component to be installed in a complete system using
good engineering practice. Care must be taken to ensure that the product is installed and used
in a safe manner according to local safety laws and regulations. In particular, the product must
be positioned such that no part is accessible while power may be applied.
This and other information from Parker Hannifin Corporation, its subsidiaries, and authorized
distributors provides product or system options for further investigation by users having technical
expertise. Before you select or use any product or system, it is important that you analyze all
aspects of your application and review the information concerning the product in the current
product catalog. The user, through its own analysis and testing, is solely responsible for making
the final selection of the system and components and assuring that all performance, safety, and
warning requirements of the application are met.
If the equipment is used in any manner that does not conform to the instructions given in this
user guide, then the protection provided by the equipment may be impaired.
The information in this user guide, including any apparatus, methods, techniques, and concepts
described herein, are the proprietary property of Parker Hannifin or its licensors, and may not be
copied disclosed, or used for any purpose not expressly authorized by the owner thereof.
Since Parker Hannifin constantly strives to improve all of its products, we reserve the right to
modify equipment and user guides without prior notice. No part of this user guide may be
reproduced in any form without the prior consent of Parker Hannifin.