Parker Hannifin 88-021610-01G - Manual (Page 31)

Parker Hannifin
Chapter 2 Mechanical Installation 31
Mounting Guidelines
The Aries drive is a vented product. To prevent material spilling into the
drive, mount it under an overhang or in a suitable enclosure.
Aries products are made available under “Restricted Distribution” for use in
the “Second Environment” as described in EN 61800-3 1996, page 9.
Cable Routing
Route high power cables (motor and mains) at right angles to low power
cables (communications and inputs/outputs). Never route high and low power
cables parallel to each other.
Panel Mounting
The mounting clearance requirements are the same for all models of the
Aries Drive. They are shown in Figure 8.
Figure 8 Panel Layout Dimensions for Aries Drives