RuggedCom RuggedRouter RX1100 - Manual (Page 113)

13. Configuring PPP And The Cellular Modem
Revision 1.14.3 113 RX1000/RX1100™
Figure 13.4. Manual Account Activation
1. First, establish an account with a service representative of the cellular network provider. You
will need the following settings in order to activate your modem. Note that not all of these
parameters are required by all network providers:
• Activation code, also known as a "subsidy lock".
• Phone Number, or MDN (Mobile Directory Number).
• MIN (Mobile Identification Number), often the same as the Phone Number.
• System ID, or Home System ID.
• Network ID
2. Click Activate.
3. The Activation status field will display: "Activation is in progress... Please wait." until a
success or failure is detected.
4. Upon successful activation, the Activation status field will automatically change to display:
"Activation successful". If it displays "Actvation Failed", please verify all activation settings or
contact the network provider's service personnel.
13.2.2. Cellular Modem Configuration
The Cellular Modem Configuration menu provides information that is necessary to establish cellular
network service, and allows the configuration of parameters that are necessary for the modem to
access the cellular network.