RuggedCom RuggedRouter RX1100 - Manual (Page 240)

26. Configuring Layer 2 Tunnels
Revision 1.14.3 240 RX1000/RX1100™
26.2.5. GOOSE Statistics Menu
Figure 26.8. GOOSE Statistics Menu
This menu presents statistics of GOOSE activity at the Ethernet and Network Layers.
The Ethernet Statistics table provides a record for each GOOSE tunnel. The number of historical
received and transmitted characters as well as errors will be displayed.
The Connection Statistics table reflects UDP connections. Network and Ethernet connections can
be paired by examining the L2 MAC Address field.
Note
All counts are from the router's perspective. The Rx Packets count reflects packets received from
the network, the contents of which are transmitted at the protocol and reflected in the Tx Chars
field.
The Round Trip Times table reflects the measured RTT to each remote daemon. The minimum,
average, maximum and standard deviation of times is presented. Wntries with a large difference
between the Transmitted and Received fields indicate potential problems.
The Refresh button will cause the page to be reloaded.
The Continuous Display button will cause the browser to continuously reload the page showing the
differences in statistics from the last display. The difference is not a real time rate in bytes or
packets per second.