RuggedCom RuggedRouter RX1100 - Manual (Page 29)

1. Setting Up And Administering The Router
Revision 1.14.3 29 RX1000/RX1100™
Figure 1.10. Selecting a configuration to reload
Initially, your RuggedRouter will have no previously saved configurations. The factory defaults will
always be available.
Once a configuration is selected the archive will be restored. After the configuration is restored, the
router will reboot immediately.
Figure 1.11. Selecting a previously made configuration
1.4. The RuggedRouter Web Interface
The RuggedCom Web interface is provided by an enhanced version of the popular Webmin interface.
1.4.1. Using a Web Browser to Access the Web Interface
Start a web browser session and open a connection to the router by entering a URL that specifies its
hostname or IP address (e.g. h ttps://179.1.0.45:10000). Once the router is contacted, start the login
process by clicking on the Login link. The resulting page should be similar to that presented below.
Enter the "root" user name and the appropriate password for that user, then click on the Login button.
The router is shipped with a default administrator password of "admin". Once successfully logged in,
the user will be presented with the main menu.