RuggedCom RuggedRouter RX1100 - Manual (Page 26)

1. Setting Up And Administering The Router
Revision 1.14.3 26 RX1000/RX1100™
1.3.3. Setting The Hostname and Domain
The Set Hostname command sets the hostname and the domain.
Figure 1.5. Hostname and Domain Configuration Menu
1.3.4. Configuring RADIUS Authentication
The Set RADIUS Authentication command configures the address of a RADIUS server, if one is
available.
Figure 1.6. RADIUS Server Configuration menu
The Hostname/IP field configures the RADIUS server's IP address.
The Port Number field sets the port number used by the RADIUS server. The default port for RADIUS
is 1812.
The Shared Secret field configures a unique password used to authenticate communications with
this server. Note that the shared secret must also be configured on the RADIUS server for the router
being configured.
The Timeout field sets the maximum time in seconds to wait for responses from the RADIUS server
before aborting a transaction.
The entry, created for both LOGIN and PPP Login, can be changed from the web interface.
1.3.5. Enabling And Disabling The SSH and Web Server
By default SSH and Web Management are enabled. The Disable SSH and Disable Web
Management commands allows these services to be disabled. The servers will be immediately