RuggedCom RuggedRouter RX1100 - Manual (Page 312)

34. Maintaining The Router
Revision 1.14.3 312 RX1000/RX1100™
• Last login causes information about the last login to be displayed: what time, from where, and
on what terminal the user last logged in.
• System Information displays information about the running operating system kernel.
• Router Status displays information on the ROX release, Webmin version, serial number,
uptime, temperature, disk, memory, and pending alarms.
The Extra Message After Login field is displayed after a successful login.
The SSH Banner Configuration has the same customizations as above except that no message can
be displayed prior to the login prompt.
The Webmin Banner Configuration menu allows you to customize the web-based login box seen
on connecting to the RuggedRouter's secure web interface:
• The Session Header field is the description displayed at the top of the login box.
• The Session Message field is the message displayed above the username and password
prompts.
• The Username and Password fields are the strings displayed at the left side of the login box,
describes that the input boxes are for username and password, respectively.
• The Login Button field is the string displayed at the left button of the login box.
• The Clear Button field is the string displayed at the right button of the login box.
The following image illustrates the position of each of these fields in the login box.
Figure 34.39. Webmin Banner Configuration Fields
The Message when Login Fails field specifies the message displayed when the login fails.
The Logout Message field specifies the message displayed upon logout.
The Message for Session Timeout field specifies the message displayed when the session is
timeout.