RuggedCom RuggedRouter RX1100 - Manual (Page 168)

17. Configuring Dynamic Routing
Revision 1.14.3 168 RX1000/RX1100™
This menu contains the configuration and status of BGP on the router.
The BGP Global Parameters and Networks menus configure BGP. The Status and View BGP
Configuration menus display the actual status and configuration file contents of BGP
17.2.3.1. BGP Global Parameters
Note
The AS ID, defined below, must be configured prior to any configuration of BGP networks or
neighbors.
Figure 17.8. BGP Global Parameter Menu
The Enable Password field sets the password to be used for the bgpd enable command. This is
used by the telnet interface to control access to the bgpd configuration.