RuggedCom RuggedRouter RX1100 - Manual (Page 83)

8. Configuring Frame Relay/PPP And T3/E3
Revision 1.14.3 83 RX1000/RX1100™
Figure 8.7. Edit Logical Interface (Frame Relay)
8.2.2.2. Editing A Logical Interface (PPP)
Figure 8.8. Edit Logical Interface (PPP)
The Local IP Address field defines the IP address for the PPP interface.
The Netmask field displays the network address mask. The value 255.255.255.255 indicates that the
connection is point-to-point.
The Remote IP Address field defines the IP address for other side of the link. This address is usually
assigned by the network administrator or Internet service provider.
The Description field attaches a description to the logical interface viewable from the network
interfaces menu.
The Delete button removes the currently selected interface.
8.2.3. T3/E3 Statistics
When at least one logical interface is configured, T3/E3 Link and logical interface statistics will be
available. These statistics are available from links on the T3/E3 WAN Interfaces menu.
Link Statistics are available via the View T3(E3)-X Link Statistics link at the bottom of each interface
table. Frame Relay and PPP statistics are available through "(Statistics)" links under the interface
name column of each interface table.