RuggedCom RuggedRouter RX1100 - Manual (Page 294)

34. Maintaining The Router
Revision 1.14.3 294 RX1000/RX1100™
When activated by pressing the Start Configuration Rollback Monitoring button, each subsequent
configuration screen will display the line “Configuration Rollback is active” at the top of the page,
reminding the user that there is a timeout period in effect, and an eventual reboot of the unit if changes
are not accepted. For example:
Figure 34.13. Ethernet main menu while Configuration Rollback is active
Please note that the timeout period is re-initialized to the value specified in the timeout entry field
at each user action. Using the above timeout value the user does not have a maximum of 300
seconds. Rather, each of his actions will reset the timer to 300 seconds. The timeout mechanism
will be in place from the time the user presses the Start Configuration Rollback Monitoring button
until he eventually goes back to the Configuration Rollback menu and presses the Accept Current
Configuration button:
Figure 34.14. Configuration Rollback menu ready to accept changes