RuggedCom RuggedRouter RX1100 - Manual (Page 265)

30. Configuring SSH
Revision 1.14.3 265 RX1000/RX1100™
The Only allow users field specifies the users allowed to connect by SSH. The specification can be
a list of user name patterns, separated by spaces. Login is allowed only for user names that match
one of the patterns. '*' and '?' can be used as wild cards in the patterns. Only user names are valid,
a numerical user ID is not recognized. By default, login is allowed for all users. If the pattern takes
the form USER@HOST then USER and HOST are separately checked, restricting logins to particular
users from particular hosts.
The account selector ( ) button can be used to build up a list of allowable users.
The Only allow members of groups field specifies the “group” (in the Unix sense) of users allowed
to connect by SSH. The specification can be followed by a list of group name patterns, separated by
spaces. If specified, login is allowed only for users whose primary group or supplementary group list
matches one of the patterns. '*' and '?' can be used as wild cards in the patterns. Only group names
are valid, a numerical group ID is not recognized. By default, login is allowed for all groups.
The account selector ( ) button can be used to build up a list of allowable groups.
The Deny users and Deny members of groups fields specify users and groups to deny connections
to.