RuggedCom RuggedRouter RX1100 - Manual (Page 299)

34. Maintaining The Router
Revision 1.14.3 299 RX1000/RX1100™
The difference will be shown by two methods. The difference between the two targets will be first be
shown in a side by side scrollable comparison.
The difference will also be shown in a window that shows differing lines.
Figure 34.22. Show Difference for selected file between two targets
The Copy This File to Current Configuration button will be present when the destination archive
is the Current Configuration. It allows user to copy the selected file from the old archive to current
configuration.
Note
It is possible to damage your router through use of this feature! Ensure that the configuration
file copied makes sense in the current version of the router.
Note that the copying configurations may not make any actual operating changes until the systems
that own them are restarted.
If the source archive has a file that is not present in the Current Configuration, it is possible to view
that file and then copy it into Current Configuration.
34.6. SNMP Configuration
The SNMP menus provide the following configuration features:
• System information
• agent network addresses
• Community access to the agent
• SNMP trap delivery
The SNMP (the Simple Network Management Protocol) protocol is used by network management
systems and the devices they manage. SNMP is used to manage items on the device to be managed,
as well as by the device itself, to report alarm conditions and other events.