RuggedCom RuggedRouter RX1100 - Manual (Page 280)

34. Maintaining The Router
Revision 1.14.3 280 RX1000/RX1100™
34. Maintaining The Router
34.1. Introduction
This chapter familiarizes the user with:
• Viewing Alerts
• Configuring and monitoring the Access Manager's Secure Access Portal
• Backing up and restoring configurations
• Configuring SNMP
• Configuring RADIUS Authentication
• Configuring Outgoing Mail
• Chassis Parameters
• Power over Ethernet
• Banner Configuration
• Using System Logs
• Upgrading Software
• Using Pre-upgrade/Post-upgrade scripts
• Uploading and downloading files
34.2. Alert System
The alert system provides the following features:
• Generates alerts, displaying them locally and/or forward them via email messages.
• Alerts are set and cleared by the daemons that own them. Active alerts are locally displayed
and can be cleared manually.
• Multiple forwarders can be configured, a configurable filter level controls alert forwarding to each
forwarder.
• By configuring different forwarders, low severity and high severity control centers can be set up.
Each alert is mapped to an alert definition entry, which is predefined by a daemon who owns the alert
or by a user. All alert definition entries are configurable by user.
An alert filter is a user defined configuration to define the forwarders destination of active alerts.
Any active alerts with Renotify Interval set to non-zero value and matches with the filter level will be
forwarded to the defined forwarder destination.