Optibase MGW 2400 WMT - Manual (Page 101)

Chapter 3 • Operating Channels
Operating Channels
This section instructs you on transmitting and receiving WMT
channels for playback.
To start playing a channel:
1. Log on to MGW 2400 EMS as Administrator or Super
User; the MGW 2400 EMS Main window appears with the
Modules page open. If you log on as Guest, you cannot
operate channels.
2. Click the Channels tab; the Channels page appears.
3. On the Channels page, select the desired channels and click
Play ; the selected channel starts playing. To start
all channels, click Select All and then Play
.
To stop playing a channel:
• On the Channels page, select the desired channel and click
Stop ; the desired channel stops playing. To stop all
channels, click Select All and then Stop .
Note
• When using an external WMS server for transmission, it may take
several minutes until the channel starts or stops playing respectively.
• When starting or stopping channels, a window appears indicating that
the relevant command is being processed. If this window does not
close within 5 minutes, click Close
and wait until the relevant
channels are started or stopped respectively.
91