Optibase MGW 2400 WMT - Manual (Page 96)

Chapter 3 • Editing Channel Parameters
Target Parameters
• For WMS Multicast, refer to the section below.
• For WMS Unicast, refer to page 89.
• For writing to a file, refer to page 90.
Viewing and Editing Target Parameters
• If you are in the process of adding a channel, select the
desired target and click Edit ; a window appears
displaying the associated parameters.
• If you are in the process of editing a channel, select the
desired target; the associated parameters appear to the right.
Parameters are unavailable for editing if the channel is
running.
WMS Multicast
Parameters Settings Comments
External WMS <None> (default) No external WMS
server is used.
IP address of an external WMS
server you may have configured for
this channel. If you wish to use an
external WMS server,
choose the desired
server's IP address
from the list. This
WMS server must
belong to the same
VLAN and workgroup
as MGW 2400.
If you do not find the
desired server's IP
address, go to the
External WMS page in
order to add it to the
Servers list. Refer to
page 64 for
instructions.
86