Optibase MGW 2400 WMT - Manual (Page 41)

Chapter 2 • Initial Configuration
Changing and adding DNS IP Addresses
MGW 2400 lets you set the IP addresses for multiple Default
Name servers (DNS) manually. You must enter all DNS IP
addresses, even if you want to add or update only one of them.
To view DNS options:
1. Log on to MGW 2400’s Configuration Utility as
Administrator; the Main menu appears.
2. Press 2 (Change Network Settings); the Network menu
appears.
3. In the Network menu, press 6 (Add or Remove DNS IP
Address); the DNS Options menu appears as illustrated
below and displays previously defined DNS IP addresses.
Figure 14: The DNS Options Menu
4. For instructions on adding or deleting DNS IP addresses,
refer to page 33.
5. To return to the Network menu, press 0 (Return to
Network Menu); MGW 2400 returns to the Network
menu.
31