Optibase MGW 2400 WMT - Manual (Page 35)

Chapter 2 • Initial Configuration
To change MGW 2400’s hostname:
1. To avoid network conflicts, make sure that you don’t have
a network device with the desired new hostname already
connected.
2. Press 1 (Rename MGW 2400); you will be asked to
confirm your request to change MGW 2400’s hostname.
Figure 11: Change the Hostname
3. Press Y to confirm the request.
4. Type the new hostname for MGW 2400 and press Enter.
MGW 2400’s hostname changes. MGW 2400 only allows
hostnames consisting of less than 15 characters.
5. Make a note of MGW 2400’s new hostname for future
reference.
6. Press any key to return to the Main menu.
7. To restart MGW 2400, press 0 (Quit); you will be asked
whether you want to reboot now or later.
8. Press Y, the Logon prompt appears and MGW 2400
reboots, which may take several minutes. The booting is
completed when you hear a beep and the Power LED turns
green.
25