Optibase MGW 2400 WMT - Manual (Page 23)

Chapter 2 • Getting Started
LEDs Description
Power Off
Blinks green
Green
No power
Booting
Power on
Alarm Off
On
No error
At least one fan is running too
slowly or failed.
Ethernet Link Off
Orange No connection
Connected
Ethernet Transmit Off
Flashes green No transmission
Transmitting
(Channel) 1-6 Off Empty slot
Blinks red
(if module inserted) MGW 2400 is booting.
Slot error (software not loaded)
Green Encoding module inserted and
ready to encode.
Blinks green Encoding
Red Encoding module inserted,
channel error.
Certain errors may cause this
LED to flash.
Table 8: MGW 2400 Front Panel LEDs
Note
To avoid damaging MGW 2400’s hardware, turn MGW 2400 off immediately
once the Alarm LED turns red.
13