Optibase MGW 2400 WMT - Manual (Page 92)

Chapter 3 • Editing Channel Parameters
Advanced Video Encoding Parameters
• If you are in the process of adding a channel, click Video
for advanced video encoding parameters.
• If you are in the process of editing a channel, click
Advanced for advanced video encoding
parameters.
• To change and save advanced video encoding parameters,
click OK .
• To close the Advanced Encoding parameter window
without making changes, click Cancel .
Parameters Settings Comments
Fixed Bit-
Rate Checked by default (recommended) To enable adjusting
the bit-rate and the
Frame Sampling
Method while playing,
clear this option.
Frame
Sampling
Method Manual
Smooth Motion
Middle
Best Quality
Full Rate To meet certain criteria
for the frame rate,
choose the relevant
option.
You can adjust the
Frame Sampling
method while playing
when Fixed Bit-Rate is
cleared.
Frame Drop
Step Encode every x frame
(x may range from 2 to 60)
Drop every x frame
(x may range from 2 to 60) Defines the highest
frame rate for
encoding. MGW 2400
may encode at a lower
frame rate than
specified.
This field only shows if
you chose Manual as
Frame Sampling
Method.
82