Optibase MGW 2400 WMT - Manual (Page 20)

Chapter 2 • Getting Started
Unpacking MGW 2400
1. Choose a dry location for MGW 2400, which complies
with the requirements regarding temperature specified at
page 98.
2. Attach the rubber feet to MGW 2400 or rack-mount it into
a rack-mount chassis. To rack-mount MGW 2400, refer to
the following section.
Mounting MGW 2400 into a Rack
MGW 2400 can be used as a stand-alone device or rack-
mounted into a 19”, 23” or ETSI rack-mount chassis. To rack-
mount MGW 2400, do the following:
1. Remove the rubber feet from the bottom, if they have been
already attached.
2. Use the supplied screws to attach the brackets to the
corners of the MGW 2400 chassis.
3. Attach MGW 2400 to the rack-mount chassis.
Note
Disconnect the power cable from the power connector while mounting MGW
2400.
10