Optibase MGW 2400 WMT - Manual (Page 36)

Chapter 2 • Initial Configuration
9. To log on again, enter the username and password for
Administrator; the Main menu appears.
10. If you don’t want to log on again, terminate the connection.
MGW 2400 is now ready to use. For instructions on operating
MGW 2400, refer to chapter 3.
If you wish to change the hostname again at a later stage, log on
to MGW 2400 as Administrator and follow the instructions at
page 25:
Note
• Every network device (e.g. MGW 2400 unit) in a network must have a
different hostname. Two devices with the same hostname will conflict.
• We strongly recommend that you make a note of your customized MGW
2400 settings for future reference. You can use the table at page 103
provided for your convenience.
• It is necessary to restart MGW 2400 in order for changes to take effect.
We highly recommend you restart the system after exiting the
configuration utility, as prompted.
26