Optibase MGW 2400 WMT - Manual (Page 86)

Chapter 3 • Editing the Channel Profile
Viewing the Channel Profile
In the MGW 2400 EMS Main window, click the Channels tab;
the Channels list appears displaying the current channel profile
as follows.
• Channel Name. The name you assigned when you added
the channel.
• Description. Displays the channel type, the slot number
and the interface where the video source is connected.
• State. Displays the channel state.
• Error Status. Displays the channel's status.
State Error Status Description
Stopped Channel OK The channel is ready.
Playing Channel OK The channel is playing.
Stopped Error The channel encountered an error while
playing, possibly caused by unsupported
parameters that you may have set. The channel
cannot restart until this error has been resolved.
Playing Error The channel encountered an error, but
continues playing.
Not
Ready Error The channel encountered an error, possibly
caused by setting unsupported parameters.
The channel cannot start until the error has
been resolved.
Table 26: Channel State and Errors
To view a channel error:
1. Select the relevant channel.
2. Right-click the selected channel; a shortcut menu appears.
3. Choose Show Error; the relevant error message appears.
For a list of error messages and explanations, refer to
MGW 2400 EMS help.
76