Optibase MGW 2400 WMT - Manual (Page 74)

Chapter 3 • Main Window Overview
The External WMS Page
Figure 24: External WMS Page
Servers
• To add or edit an external WMS server, go to the External
WMS page, select a list entry and type or change the IP
address, user name and password as required and click
Apply
; the desired server is added to the list. An
external WMS server must belong to the same workgroup
as MGW 2400.
• To select an existing WMS server for transmission, go to
the Target page and choose the desired server from the
External WMS list. Refer to page 86 for instructions.
• To remove an existing server, select the relevant servers
table entry, delete the IP address and click Apply ;
the relevant server is removed.
• If no servers are configured, server table entries display Not
Configured.
64