Optibase MGW 2400 WMT - Manual (Page 17)

Chapter 2 • System Configuration
Component Description
MGE-400 encoding module Module for WMT encoding from analog
sources.
MGE-400D encoding module Module for WMT encoding from analog or
digital sources.
Video BNC cable Connects a Composite Video source to
MGW 2400.
Low Loss Digital Video Belden
1694A cable Connects an SDI source to MGW 2400.
S-Video MiniDIN cable Connects an S-Video source to MGW
2400.
Audio Stereo MiniJack cable Connects an analog audio source to
MGW 2400.
RCA Coaxial cable Connects a digital audio source to MGW
2400.
Table 3: Encoding Modules
Component Description
MGW 2400 Configuration Utility Pre-installed software to configure MGW
2400.
MGW 2400 EMS SNMP based Transmission management
software that you install on a PC on the
network. This PC is referred to as
Management PC.
Table 4: Software
Document Description
MGW 2400 User’s Manual Shows you how to install and operate
MGW 2400.
MGW 2400 EMS Help Shows you how to use the MGW 2400
EMS. It installs together with the MGW
2400 EMS on the Management PC.
Table 5: Documentation
7