Optibase MGW 2400 WMT - Manual (Page 29)

Chapter 2 • Getting Started
To connect an audio source:
• Analog audio. Use the Stereo MiniJack audio cable
(catalog number WCA2274) as illustrated in Figure 7 to
connect the audio source to the ANALOG AUD connector.
Figure 7: The Stereo MiniJack Audio Cable (WCA2274)
• Digital audio. Use the RCA Coaxial cable (catalog number
WCA2199) as illustrated in Figure 8 to connect the audio
source to the DIG AUD connector.
Figure 8: The RCA Coaxial Cable (WCA2199)
Note
• You can connect digital audio sources to MGE-400D encoding modules
only.
• MGW 2400 does not support SECAM sources.
19