Optibase MGW 2400 WMT - Manual (Page 77)

Chapter 3 • Viewing and Setting Module Parameters
Viewing and Setting Module Parameters
To access the desired encoding module's parameters, click the
associated image in the Modules page.
I/O Parameters
Figure 25: Encoding Module - I/O Parameters
Video Settings Comments
Source Composite Analog video signal that combines
all the components in one signal.
S-Video Analog video signal that carries
separate luminance and chroma
signals.
SDI Digital video signal, available for
MGE-400D encoding modules.
Color System NTSC, PAL,
Auto Detect Determines the color system.
MGW 2400 and your source
device must be set to the same
color system parameter. If you
choose Auto Detect, MGW 2400
automatically detects the correct
color system.
Input Detect No source
Source detected
67