Optibase MGW 2400 WMT User Manual
Page 56
Chapter 2
• Changing Settings from a Remote PC
46
you want to restart now or later upon logging off MGW
2400.
6. To restart now, press Y; MGW 2400 logs off and reboots,
which may take several minutes. Log on again with the
new parameters to confirm that the requested changes have
been made.
7. To restart at a later stage, press N; MGW 2400 logs off.
Make sure that MGW 2400 will be restarted as soon as
possible for changes to take effect.
8. To log off without performing any task, press 0 (Quit).
MGW 2400 is now ready for use. For instructions on operating
MGW 2400, refer to chapter 3.
Note
• We strongly recommend that you make a note of your new network
settings; otherwise you may not be able to log on again. You can use
the table provided at page 103 for your convenience.
• It is necessary to restart MGW 2400 in order for changes to take effect.
We highly recommend you restart the system after exiting the
configuration utility, as prompted.