Optibase MGW 2400 WMT - Manual (Page 40)

Chapter 2 • Initial Configuration
6. To auto-select the network mode, press 5 (Auto Selection).
7. To return to the Network Mode Settings menu, press any
key.
8. To return to the Network menu, press 0 (Network Menu).
9. To select the network mode for the second NIC, repeat
steps 3 - 8.
10. To return to the Main menu, press 0 (Main Menu); MGW
2400 returns to the Main menu.
11. To log off MGW 2400, press 0 (Quit); you will be asked
whether you want to restart now or later.
12. To restart now, press Y; the Logon prompt appears and
MGW 2400 reboots, which may take several minutes. The
booting is completed when you hear a beep and the Power
LED turns green.
13. To log on again, type the username and password for
Administrator after MGW 2400 finished booting; the
Main menu appears.
14. To restart later, press N; the Logon prompt appears. You
will have to restart MGW 2400 at a later stage.
15. If you don’t want to log on again, terminate the connection.
To view the network mode and the network's speed:
• On the Network menu, press 5 (View Network Adapters
Status); the network mode and speed display for both
network segments.
Note
It is necessary to restart MGW 2400 in order for changes to take effect. We
highly recommend you restart the system after exiting the configuration
utility, as prompted.
30