ACU-RITE MILLPWR 3 Axes - Manual (Page 121)

PROGRAM STEPS
MILLPWR ®
Operation Manual 5-25
• Enter the Z-axis feed rate.
• Enter the radius.
• For the direction, press the CW softkey for clockwise or the CCW softkey for a counter-
clockwise direction.
• Select the appropriate tool offset.
• Enter the table’s feed rate.
• If you would like to program a finish cut, press the MORE
softkey.
Enter the amount of material to be removed during the finish
cut.
Enter the feed rate for the finish cut.
Select the finish cut's direction. Press the CW softkey for a
clockwise direction or the CCW softkey for a counter-clock-
wise direction.
• Press the USE key.
Note: If the tool size and type in the "Tool" field are incorrect, change the tool settings
before running your program (refer to Programming a Tool Step).