ACU-RITE MILLPWR 3 Axes - Manual (Page 222)

REMOTE STORAGE
MILLPWR ®
Operation Manual
Installing the Remote Storage Program onto Your PC
You can install the Remote Storage program onto your PC using either Microsoft ® Windows ®
95/98 or MS DOS ® operating systems. Choose the system you will use, then follow the applica-
ble steps below.
For Windows 95/98:
1. Power up your PC.
2. Insert the "Remote Storage" disk into your PC's floppy disk drive.
3. Click on "START."
4. Click on "Run," then type a:install and click "OK." This copies all of the files from the
disk and onto your PC.
5. Instructions on how to use Remote Storage will be displayed on your PC screen.
6. Close the DOS window. A Remote Storage icon should now appear on your PC screen.
Double-click on the icon to run the Remote Storage program.
For MS DOS:
1. Power up your PC.
2. Insert the "Remote Storage" installation disk into your PC's floppy disk drive.
3. At the C:\. prompt, type a: then press
ENTER .
4. After the A:> prompt, type install, and press ENTER again. This command tells the PC
to copy all the files from the disk onto your PC.
5. At the next prompt, type c: then press ENTER .
6. After the C:\ prompt, type cd remtstor and press ENTER .
7. C:\REMTSTOR\> will appear. Type remtstor and press ENTER .
Your PC should now display the Remote Storage Utility screen.
8-3