Setup, Operation manual – ACU-RITE MILLPWR 3 Axes User Manual
Page 183
Advertising
SETUP
MILLPWR
®
Operation Manual
7-3
To enter a tool into the Tool Library:
•
From Setup, highlight “Tool Library” then press
ENTER
.
•
Highlight a blank row in the Tool Library and press
ENTER
.
•
Enter the tool’s diameter.
•
Highlight the “Type” field.
•
Press the
TOOL TYPES
softkey.
•
Highlight the tool type that describes the tool you’re using.
Press
ENTER
.
•
Press the
USE
key.
•
Continue with Setup or press the
USE NEW SETTINGS
softkey.
If you need to,
change the
units (inches or
mm) for the tool
you’re using
before you set
the length.
Using the tool library without repeat-
able tool lengths:
Advertising