ACU-RITE MILLPWR 3 Axes - Manual (Page 91)

DEMONSTRATION
MILLPWR ®
Operation Manual 4-15
Programming the Rectangular Pocket
First, let’s enter the tool that is needed to machine the pocket.
• Press the TOOL TYPE softkey.
• Adjust the spindle direction and speed.
• Press the USE key.
• Arrow down and highlight the “Tool Type” field.
• Press the TOOL key and enter the data for a 0.125"
diameter flat end mill.
• Highlight “Flat End Mill.”
• Press the ENTER key.
• Press the RECT (rectangle) key, then press the
POCKET softkey.