ACU-RITE MILLPWR 3 Axes - Manual (Page 42)

PROGRAMMING
MILLPWR ®
Operation Manual 3-6
• After entering all the data for a step, press the USE key to add the step to your program.
This immediately updates the part graphic and positions the cursor for the next step.
If you decide not to finish a milling function that you have begun, simply press the CANCEL
key.
• To edit a step, use the arrow keys to highlight the step you want to change and press
USE or ENTER . When you have made your changes, press USE to accept your changes
and place the step back into your program.
• To delete a step, highlight the step you want to delete, then press CLEAR .
• To insert a step between the two existing steps, position the cursor to where you want the
new step to go, and press the desired milling function key.
In addition to the hard key milling functions, the MORE STEPS softkey lets you pick from a
number of other useful steps, such as CUSTOM POCKET , ISLAND , ELLIPSE , MIRROR , REPEAT
and ROTATE —each of which are described in the Program Steps section of this manual.