Setup, Operation manual – ACU-RITE MILLPWR 3 Axes User Manual
Page 200
Advertising
SETUP
MILLPWR
®
Operation Manual
7-20
To change the encoder direction and coupling settings:
•
From Installation Setup, highlight “Encoder Setup” and press
ENTER
.
•
Highlight the axis you wish to change and press
ENTER.
Now use the
NEGATIVE
and
POSITIVE
softkeys to change the count direction.
•
Highlight “Coupling,” and use the
OFF
,
COUPLE Z+W
and
COUPLE Z-W
softkeys
to change coupling.
•
Press the
USE
key.
•
Continue with Setup or press the
USE NEW SETTINGS
softkey.
To change the direction of the encoder phase:
•
From within the Encoder Setup menu, arrow down and highlight the “Encoder -
Phase” field.
•
Now use the
NEGATIVE
and
POSITIVE
softkeys to change the phase direction.
•
Press the
USE
key.
•
Continue with Setup or press the
USE NEW SETTINGS
softkey.
Advertising