ACU-RITE MILLPWR 3 Axes - Manual (Page 50)

PROGRAMMING
MILLPWR ®
Operation Manual 3-14
MANUAL POSITIONING
Use this option if you want to position the table using the handles. MILLPWR will operate
just like a programmable readout—each target position will be preset into the readout, and
you will be prompted to position the table manually. This feature is especially useful when
you’re navigating around islands. Press the
GO key to begin.
DISABLE LOOK AHEAD
Normally, MILLPWR checks each step in a continuous tool path with other steps to determine
if there is an intersection in the tool's cutting path (such as in the number “8”). This is called
“look ahead.” If you press the
DISABLE LOOK AHEAD softkey, your program will run with-
out performing this function. Press the GO key to begin.